Obviously just making horse HEADS wasn’t going to be enough so I made a wire frame and made a whole entire horse.
I don’t yet know how to do the fine details or smooth out the tool marks, but here it is. It’s about 6 inches tall. Once I had it made in modeling clay I realized that I don’t know how to cast this, even if I made a two part mold for two reasons. 1) the shape and 2) the only time I’ve done a two part mold I embedded the original in modeling clay to make the first half. This is made of modeling clay so what do I embed it in?
And finally, for a year-end wrap up, I made a gallery page of the ‘best of’ 2018.
I never finished cleaning up or posting my photos from France – I still intend to do so.
I also did a few more test paints of the chess set. This is blue, with a metallic blue finish and the Warder has his shield, helmet and sword painted with an ‘interference’ paint – it will shimmer green or red depending on the angle of view.
It has been suggested that I’ve gone a bit off the rails since I went to New Mexico to learn how to make SOAP MOLDS and this is clearly not a soap mold. But I learned something very valuable: making custom molds is expensive and I should definitely do everything I can to avoid having to make custom ones from silicone!
I’ve been puzzling over the size and shape of conditioner bars. I now have a formula I really like but I still need to settle on the packaging and the shape. I think I’m going to try a round column mold – I might make out out of PVC with a teflon liner – and since PVC comes in all sizes I can probably find one to exactly fit the 2 or 4oz tins I’ve been thinking of using as packaging.
One thing leads to another. I went to New Mexico specifically to learn how to make SOAP molds, but somehow that led to an obsession with the Lewis Chessmen, and while thinking of things I might like to 3D print or cast in resin, I started thinking about chess sets in general. Also: my artist friend suggested that my 3D prints will be better if I have some experience with sculpture, even if I’m not very good.
So what should I sculpt? The absolute easiest thing for me is going to be horses. I drew only ONE thing as a child and it was horses 24/7.
I took some polymer clay I had sitting around and some j-mac oil-based modeling clay I was given and went at it.
I first made a few reclining ponies. They are quite small – so small that I had difficulty handling them. The first is made of j-mac and the smaller one of translucent polymer clay. I was thinking of making them into netsuke – these are carved buttons or toggles that are worn with kimono.
Next I started thinking about designing my own chess set and I spent a while looking at classic sets and some 3D printed models. Except for the knight, most chess pieces look like they are turned on a lathe, but the knight is special and asymmetric. For my very first try (back left in the collection) I went for something semi-realistic, but then I thought a much more stylized version might be fun. At the end I started going for something like an ancient bronze statue I’d seen before.
When I took that basic shape and made it less flat, I think my result looks more like a sea serpent with a mane, but I still like it.
The polymer clay is easy to smooth and overall easy to work with but it is difficult to get fine detail. The j-mac takes detail but I haven’t yet figure out how to get my toolmarks and fingerprints off the model. I also need to figure out how to stop dropping them while i’m working.