Posted on 2 Comments

Final word in 2018

Obviously just making horse HEADS wasn’t going to be enough so I made a wire frame and made a whole entire horse.

I don’t yet know how to do the fine details or smooth out the tool marks, but here it is. It’s about 6 inches tall. Once I had it made in modeling clay I realized that I don’t know how to cast this, even if I made a two part mold for two reasons. 1) the shape and 2) the only time I’ve done a two part mold I embedded the original in modeling clay to make the first half. This is made of modeling clay so what do I embed it in?

horse sculpture

And finally, for a year-end wrap up, I made a gallery page of the ‘best of’ 2018.

I never finished cleaning up or posting my photos from France – I still intend to do so.

I also did a few more test paints of the chess set. This is blue, with a metallic blue finish and the Warder has his shield, helmet and sword painted with an ‘interference’ paint – it will shimmer green or red depending on the angle of view.

It has been suggested that I’ve gone a bit off the rails since I went to New Mexico to learn how to make SOAP MOLDS and this is clearly not a soap mold. But I learned something very valuable: making custom molds is expensive and I should definitely do everything I can to avoid having to make custom ones from silicone!

I’ve been puzzling over the size and shape of conditioner bars. I now have a formula I really like but I still need to settle on the packaging and the shape. I think I’m going to try a round column mold – I might make out out of PVC with a teflon liner – and since PVC comes in all sizes I can probably find one to exactly fit the 2 or 4oz tins I’ve been thinking of using as packaging.

More soap to come in 2019

Posted on 1 Comment

Tiny horses

One thing leads to another. I went to New Mexico specifically to learn how to make SOAP molds, but somehow that led to an obsession with the Lewis Chessmen, and while thinking of things I might like to 3D print or cast in resin, I started thinking about chess sets in general. Also: my artist friend suggested that my 3D prints will be better if I have some experience with sculpture, even if I’m not very good.

So what should I sculpt? The absolute easiest thing for me is going to be horses. I drew only ONE thing as a child and it was horses 24/7.

I took some polymer clay I had sitting around and some j-mac oil-based modeling clay I was given and went at it.

I first made a few reclining ponies. They are quite small – so small that I had difficulty handling them. The first is made of j-mac and the smaller one of translucent polymer clay. I was thinking of making them into netsuke – these are carved buttons or toggles that are worn with kimono.

Next I started thinking about designing my own chess set and I spent a while looking at classic sets and some 3D printed models. Except for the knight, most chess pieces look like they are turned on a lathe, but the knight is special and asymmetric. For my very first try (back left in the collection) I went for something semi-realistic, but then I thought a much more stylized version might be fun. At the end I started going for something like an ancient bronze statue I’d seen before.

Something like this

When I took that basic shape and made it less flat, I think my result looks more like a sea serpent with a mane, but I still like it.

The polymer clay is easy to smooth and overall easy to work with but it is difficult to get fine detail. The j-mac takes detail but I haven’t yet figure out how to get my toolmarks and fingerprints off the model. I also need to figure out how to stop dropping them while i’m working.

Posted on Leave a comment

Lewis Chessmen

While learning how to make molds I became accidentally obsessed with the Lewis Chessmen.  We saw them first two years ago on our trip to Scotland and I tried to 3-D print one to make a test mold out of when I went to NM.  The 3-D print wasn’t detailed enough and soon after I discovered that I could purchase pre-made molds.  They are latex, not especially durable, and  I’m a bit afraid to cast resin in them.  I ruined one already by trying to cast wax into it and then couldn’t get the wax back out again. 

The originals are from the 12C and were discovered on the Island of Lewis in the Outer Hebrides.  There are 78 chess pieces in total.

Some of the original chessmen in Edinburgh.  
A bishop.  One of my molds includes this particular figure.
A berzerker.  This would take the place of a Rook.  I LOVE him.  Alas, he is not included in my set of molds.
The sets were originally white (walrus ivory) and red (paint).  I’m tryint to re-create that original look.
Playing around some more with warmer/cooler casts and one silver-on-black just to see how it looks.